Kitbashed Inquisition Gun-Cutter

High Altitude Flight.

"What rose above the landing platform out of the blizzard night,its down thrusters wailing, was my gun-cutter. Four hundred and fifty tonnes of armoured alloy, eighty metres from barbed nose to raked stern, landing gear still lowered like spider legs, it rose on the blue-hot downwash of angled jets. Banks of floodlights under its beak-nose cut on and bathed the deck and the cultists in fierce white light.

The gun turrets in the end of the stubby wings rotated and washed the platform with withering heavy fire.....Bodies were reduced to sprays of liquid.'
Xenos

Thus Dan Abnett inspired me to kitbash a Gun Cutter for my Inquisitor and gang. Eighty metres is a trifle on the large size, about 1.2 metres in game scale, so I cut it back a bit.

I started with one of these, A Revell snap-together Halo Pelican kit. This is modelled at 1:100, roughly 15mm in game scale, so is manageable as a 28 ml model on the table top. These models can be bought for about £25.

This kit really does snap together. The parts fit tightly without glue. I am a little uncertain about this being suitable for children as quite a bit of pressure is needed on the snap-tights. The assembled whole has great playability with lots of moving parts, bits that light up and a 'whoo-whoo' space noise.

Assembled it's about the same size as a Valkyrie. The great thing is that the cockpit bubbles are huge at 15mm, so just right for 28mm.

I was so pleased with the result that I used the model more or less as is.

Gun Cutter in Flight Configuration.

I sprayed the model all over in Citadel Mechanicus Standard (medium) Grey to prime and undercoat - with the cockpit removed. To this I airbrushed on a top coat of Vallejo metallic black (gunmetal) and on top of that Humbrol Multi-Hue Blue. I then spot painted with Mr Colour Metallic Red. Some spare Citadel 'flight' decals completed the look.

The Business End.

I put a couple of searchlights on the front hull. The model comes with four hard points on the wings so I added some Old Crow resin missiles from my bits box.

The cockpit is colourised on the inside with Citadel 'candy' blue transparent paint so one can't see the 15mm seats but the blue interior flashing light is still visible when i want to make woo-woo noises.

Landing Gear Lowered.


With the gear lowered and the ramp dropped down at the rear, the Cutter can easily be loaded.

Rotating Thrusters.

Ready for Vertical Lift Off.

I added two rotating cannon mounts under the engines. The Cutter now has the same weapon loading as a Corvus so may be played as one and still be wysiwyg.

So there we go: a really neat Inquisition Gun Cutter for the princely sum of £25, some paint, and a few spare bits.

Result!